亚洲一区二区三区在线-欧美一二区-欧美亚洲一区-欧美激情一区

D-Sub混合著連結器AMPHENOL

上傳時長：2023-10-23 17:16:44     閱覽：962

AMPHENOL TW混合型喂養D-Subminiature聯系器為板端和線端聯系給予普及的端接使用，為電覽和PCB控件能提供切實性解決處理措施。D-Sub相混連入器端接行式例如直式和直線等板端連入基本焊杯式和鉚合（只能于電插針）等數據線線端連入。很多端接選定 均配備有插座就多留幾個和電源插座連入器。

D-Sub混相連器3種二極管封裝布局狀態（德國原則、警用原則和混合物原則）均可操作于斜角PCB端接。配接地理位置觸碰件外表會根據鑲金處里，能會根據所須要的配接周期選澤3種大多厚度：閃金(GoldFlash)、15μ"和30μ"。數字信號插針的焊接方法地理位置打交道件面上經歷過鍍銀救治，而外接電源插針則給出鍍錫救治。D-Sub相混接入器出具細密機件制作型號，載荷系數直流電高至7.5A，一般用在安全保障能信性較高的技木采用。低溫尼龍繩接觸板可供業主技木采用通孔回到焊接生產加工過程技木。

AMPHENOLD-Sub混合著銜接器供給從E、A、B、C到D五大常規后蓋外形尺寸，而混相連器則相對于警報、電源開關和同定位軸線給予高至18種碰到點編排。PCB選配自帶安全穩定接處點和支柱架。

搭配D-SUBMINIATURE鏈接器

滿足了MILC24308標的配接網絡端口

走勢接口額定功率為7.5A，電壓插孔的較大載荷系數電壓為40A

耐高溫高至260°C

相處電阻值壓低5m?

而言數據信號、開關電源和同軸觸及點提拱高至18種配值

自動化設備加工生產接觸件的安裝在絕緣帶體中

因素

規則D型連結器

EMI五金外殼

電源插頭接地保護凹痕

銜接板挑選耐燃熱固性塑

提高數據信號/24v電源/同中線交織工具欄

出示選擇不一樣的端接狀態的固件版本

多種端接固件版本均擁有家用插座和插座

好處

保證 精準的的配接大方向

一般在需要高穩定性的技術用途

只能根據UL#232356企業認證

適于于高技巧使用

提供行業內規范標準

可適應環境種種企業客戶市場需求

長沙市立維創展網絡代理費經銷處AMPHENOL子公司幾大方面物料類型，在AMPHENOL，AMPHENOL想信在深入推進工作的環節中作出可持繼的選都可以為項目公司的股東創造者短期貸款和長時意義。AMPHENOL的任一筆相關業務都全力于持續不斷不斷學習其設計的概念，企業采購，制造廠和支付貨品的行為，努力奮斗提供或掌控的客戶對正個使用供應鏈一體化中貨品經營的期許。AMPHENOL 的國際業務將安全管理和壞境守護最為首先是工作，并只能根據ISO 14001和OHSAS 18001等全球公認標的管理這部分準備。然而，注冊和法安全性還跟不上。AMPHENOL一方面僅遵守規則標準就能創造出常年交換價值。

詳情介紹明白AMPHENOL可點擊：//www.zhixianguangzhou.com.cn/article/1321.html

AMPHENOL.jpg

軟件商品詳情頁

3D MODEL (STP)

L177TWA11W1SP3SYRM84

Dsub, Machined Hybrid, 11W1, Power (40A)&Signal (7.5A) Contacts, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power&0.76m (30 in) Signal, 4-40 Fixed Front Screwlock with Standoff and Boardlock

L177TWA3W3SC805

Dsub, Machined Hybrid, 3W3, Power (40A) Contacts Only, Socket, Soldercup Cable Mount, Bright Tin Shell, 3.05mm (.120in) Clear Hole

L177TWA3W3SMP2V4RRM6

Dsub, Machined Hybrid, 3W3, Power (20A) Contacts Only, Socket, Right Angle PCB Thru Hole Mil (U.S.) Footprint, Bright Tin Shell, 0.76m (30 in) Power, P=9.52mm (0.375in), 4-40 Threaded Rear Nut, With Bracket&Boardlock

L177TWA3W3SP2Y

Dsub, Machined Hybrid, 3W3, Power (20A) Contacts Only, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power, 3.05mm (0.120in) Clear Hole, Without Standoff&Boardlock

L177TWA3W3SP2YFM

Dsub, Machined Hybrid, 3W3, Power (20A) Contacts Only, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power, Float Mounting, Without Standoff&Boardlock

L177TWA3W3SP2YRM53

Dsub, Machined Hybrid, 3W3, Power (20A) Contacts Only, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power, M3 Threaded Standoff (Panel Side) with Boardlock

L177TWA3W3SP2YRM54

Dsub, Machined Hybrid, 3W3, Power (20A) Contacts Only, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power, 4-40 Threaded Standoff (Panel Side) with Boardlock

L177TWA3W3SP3Y

Dsub, Machined Hybrid, 3W3, Power (40A) Contacts Only, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power, 3.05mm (0.120in) Clear Hole, Without Standoff&Boardlock

L177TWA3W3SP3YRM53

Dsub, Machined Hybrid, 3W3, Power (40A) Contacts Only, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power, M3 Threaded Standoff (Panel Side) with Boardlock

L177TWA3W3SP3YRM54

Dsub, Machined Hybrid, 3W3, Power (40A) Contacts Only, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power, 4-40 Threaded Standoff (Panel Side) with Boardlock

L177TWA3W3SP3YRM84

Dsub, Machined Hybrid, 3W3, Power (40A) Contacts Only, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power, 4-40 Fixed Front Screwlock with Standoff and Boardlock

L177TWA7W2P

Dsub, Machined Hybrid, 7W2, Signal (7.5A) Contacts Only, Pin, Soldercup Cable Mount, Bright Tin Shell, 0.76m (30 in) Signal,

L177TWA7W2PP3SY

Dsub, Machined Hybrid, 7W2, Power (40A)&Signal (7.5A) Contacts, Pin, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power&0.76m (30 in) Signal, 3.05mm (0.120in) Clear Hole, Without Standoff&Boardlock

L177TWA7W2S

Dsub, Machined Hybrid, 7W2, Signal (7.5A) Contacts Only, Socket, Soldercup Cable Mount, Bright Tin Shell, 0.76m (30 in) Signal, 3.05mm (0.120in) Clear Hole

L177TWA7W2SEP3SV

Dsub Machined Hybrid 7W2 Coax&Signal

L177TWA7W2SFM

Dsub, Machined Hybrid, 7W2, Signal (7.5A) Contacts Only, Socket, Soldercup Cable Mount, Bright Tin Shell, 0.76m (30 in) Signal, Float Mounting

L177TWA7W2SHP2SV4RRM6

Dsub Machined Hybrid 7W2 Coax&Signal

L177TWA7W2SMP2SV4RRM6

Dsub Machined Hybrid 7W2 Coax&Signal

L177TWA7W2SMP3SV4RRM6

Dsub Machined Hybrid 7W2 Coax&Signal

L177TWA7W2SMP3SVRM6

Dsub, Machined Hybrid, 7W2, Power (40A)&Signal (7.5A) Contacts, Socket, Right Angle PCB Thru Hole Mil (U.S.) Footprint, Bright Tin Shell, 0.76m (30 in) Power&0.76m (30 in) Signal, P=21.46mm (0.845in) S=8.10mm (0.319in), With...

L177TWA7W2SP2SY

Dsub, Machined Hybrid, 7W2, Power (20A)&Signal (7.5A) Contacts, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power&0.76m (30 in) Signal, 3.05mm (0.120in) Clear Hole, Without Standoff&Boardlock

L177TWA7W2SP3SY

Dsub, Machined Hybrid, 7W2, Power (40A)&Signal (7.5A) Contacts, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power&0.76m (30 in) Signal, 3.05mm (0.120in) Clear Hole, Without Standoff&Boardlock

L177TWA7W2SP3SYRM54

Dsub, Machined Hybrid, 7W2, Power (40A)&Signal (7.5A) Contacts, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power&0.76m (30 in) Signal, 4-40 Threaded Standoff (Panel Side) with Boardlock

L177TWA7W2SP3SYRM84

Dsub, Machined Hybrid, 7W2, Power (40A)&Signal (7.5A) Contacts, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power&0.76m (30 in) Signal, 4-40 Fixed Front Screwlock with Standoff and Boardlock


比較適合房產資訊
  • 關于THUNDERLINE-Z產品申明
    關于THUNDERLINE-Z產品申明 2020-10-14 15:54:05 蘇州市立維創展自動化有效子公司，是意大利THUNDERLINE-Z & Fusite品牌標志目前在國內大的授權文件銷售分銷商，其復合磨砂玻璃密封性接線鼻子，已廣泛的應該用于航天工程、美國軍事、通訊等高信得過性的領域。
  • CMD283C3超低噪聲MMIC放大器現貨庫存
    CMD283C3超低噪聲MMIC放大器現貨庫存 2025-08-22 16:41:29 Custom MMIC（現屬 Qorvo）的 CMD283C3 極低的躁音 MMIC 拖動器用 3x3 mm 無引線陶瓷制品 QFN 封裝形式，率超范圍 2 - 6 GHz，應具高增益值、低的躁音、低功能消耗等因素，不適用做 S/C k線多業務領域。